Maintenance and diagnostics
The NW8204 maintenance and diagnostic tool
9
67
Building Technologies
A6V10062437_a_en
Fire Safety & Security Products 30.06.2013
NW8204 window (installed GUI)
2. Insert the NK IP Address.
Note: Inserting an incorrect IP address causes the following window to appear.
If you receive this message, select OK and re-type the IP Address. If you want to
enter the NK8000 default IP address 192.168.9.41, you can use the menu Set
Default IP Address instead of typing it.
3. Select Open Connection.
NW8204 opens a FTP session on the NK8000 and lists all files available on the
NK8000 flash disk.
To Next Page
Loading...
