About this document
Purpose
This document is a guide to the planning, installation and configuration of the
NK8000 safety and security network. It includes an overview of the system,
hardware requirements and limitations, and detailed installation and configuration
instructions. Hardware components detailed in this manual include the NK822x
(NK8222, NK8223, NK8225) and NK823x (NK8231, NK8232, NK8235) Ethernet
Ports.
This guide is to be used in conjunction with the product-specific
Danger
Management System Installation, Configuration, and Commissioning guide
(MM8000 / MK8000 / MT8001)
, and the DMS8000 Connectivity Guides.
Scope
This document applies to NK8000 MP4.81-02 service release.
Target audience
This documentation is intended for the following users:
⚫ Project Managers
⚫ Project Engineers
⚫ Commissioning Personnel
It is assumed that individuals performing the operations described in this manual
have prior expertise and training in the field of safety and security, at least a
moderate level of familiarity with the Siemens Building Technologies product line,
and experience with the installation, configuration, and commissioning of security
management systems.
Documentation resource information
The
DMS8000 Documentation Resource Information and Glossary Guide
assembles important information regarding documentation resources. This
document contains the following:
⚫ Comprehensive definitions of the target audiences for Siemens FS DMS
documents
⚫ Training program information including the Siemens intranet link
⚫ A complete list of all available DMS8000 documents
⚫ Instructions for how to obtain a document via the Siemens intranet using the
Siemens Asset Portal
⚫ A map of relevant documents for each target audience group
⚫ Customer Support links & resources
⚫ A glossary containing definitions of all terms and acronyms used in DMS8000
documentation
To access the
DMS8000 Documentation Resource Information and Glossary
Guide
(document no. A6V10089056), go to the link and follow the document
search instructions below:
https://step.bt.siemens.com/portal/StandardAssetPortal
1. In the Simple Search column on the left, set:
– Search Text: Enter the document number to search for (for example
A6V10089056
) or type part of the document name.
– Asset Type: All
2. Click Search to start.
To Next Page
Loading...
