8-3
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
A recipe is identified by a recipe number and a recipe title specified during
configuration.
A data record is identified by a data record number and a data record name
assigned in the OP.
The clear and unmistakable identification factor for a data record is the data
record number and not the data record name.
This means that, although several data records with the same name may ex-
ist, several data records with the same number cannot exist. If no name is
assigned to a data record, it is assigned the name ”data record”.
Standard screens with the following functions are available for data records.
Record
Edit Print Transfer
| | |
Set up, edit and delete data re-
cords
1 2 3
1
2
3
Print data records
Transfer data records from the
OP to the PLC or vice versa
Figure 8-2 Standard screens for data records
Recipes are combined into a recipe directory which can be used to indicate
them on the display, and to print and edit them. A recipe is located in the
recipe directory under its recipe number and its recipe title.
Identification of
recipes and data
records
Standard screens
for data records
Directory for
recipes
Recipes
To Next Page
Loading...
