Siemens OP15 - Page 76

8-10
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
Proceed as follows to transfer a data record.
1. Select the standard screen Records  Transfer.
2. Select the recipe in the recipe directory.
3. Position the cursor on the Source field in the transfer screen.
Depending on the direction of transfer desired, enter the appropriate
source number (see examples), and confirm.
4. Position the cursor on the Destination field.
Depending on the direction of transfer desired, enter the appropriate des-
tination number (see examples), and confirm.
5. Position the cursor on the Accept field, and confirm transfer.
During the data transfer, an asterisk (”*”) is indicated in the acceptance
field.
6. Exit the standard screen with ESCAPE.
Using the transfer
screen
Recipes