25 |
2015-05-04
3.4 Mechanical setup
One of the following devices is required to install a point detector:
● Detector base DB72x
● Sounder base DBS720
After installing the detector base or sounder base, simply insert the point detector
in the base and turn it, either manually or using the detector exchanger DX791,
until you hear and feel it snap in.
Properties
● Quick installation and secure contact
● The centered alarm indicator makes an alignment of the detector base
superfluous
● Space for up to 4 auxiliary terminals
Accessories are available for a variety of different applications and can be
combined to suit the particular application in question.
See also
Accessories [➙ 26]
To Next Page
Loading...
