Step by Step
Enhanced phone functions
42
Talking to your colleague with discreet cal-
ling (not for HiPath 500)
If this function has been configured (ask your service
personnel), you can join an ongoing call conducted by
an internal user at a system telephone with display.
You can listen in unnoticed and speak to the internal
user without being overheard by the other party
(discreet calling).
^ Lift the handset.
)945 Enter the code.
j Enter your internal station number.
Automatic connection setup (hotline)
If this function is configured (contact your service per-
sonnel), the system automatically sets up a connection
to a preset internal or external destination.
^ Lift the handset.
Depending on the setting, the connection is either set
up immediately or only after a preset period of time
(hotline after a timeout).
Assigning a station number (not for U.S.)
If this function has been configured (contact your ser-
vice personnel), you can selectively assign a specific
number (DID number) to your telephone before making
an external call. The assigned number then appears on
the called party’s display.
N Press the key shown.
Select and confirm the option shown.
j Enter the DID number you wish to use.
j Dial the external number.
Your service personnel can protect your telepho-
ne against discreet calling.
*41=Temporary MSN?
To Next Page
Loading...
Need help?
General