Siemens OPENSTAGE 20 - Page 39

inbetriebnahme.fm
A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual
2-23
Startup
Quick Start
5. If the DLS address is to be provided by DHCP: Enter the DLS address in the Value field,
using the following format:
<PROTOCOL>:://<IP ADDRESS OF DLS SERVER>:<PORT NUMBER>
In the example, the DLS address is "sdlp://192.168.3.30:18443".
Note that the screenshot also shows the VLAN ID described in step 4.
Click OK.
>
For ensuring proper functionality, the port number should not be followed by any
character.