EasyManua.ls Logo

Siemens OPENSTAGE 20 - Automatic VLAN Discovery (DHCP)

Siemens OPENSTAGE 20
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administration
A31003-O1010-M100-9-76A9, 05/05/2008
3-8 HiPath 8000 - OpenStage Family, Administration Manual
administration.fm
LAN Settings
3.2.2.1 Automatic VLAN discovery (DHCP)
To automatically discover a VLAN ID using DHCP, the phone must be configured as DHCP en-
abled, and VLAN discovery mode must be set to "DHCP". The DHCP server must be config-
ured to supply the Vendor Unique Option in the correct Siemens VLAN over DHCP format. If a
phone configured for VLAN discovery by DHCP fails to discover its VLAN, it will proceed to con-
figure itself from the DHCP within the non-tagged LAN. In these circumstances network routing
will probably not be correct.
Administration via WBM
Network > IP configuration
Administration via Local Phone
|
--- Administration
|
--- Network
|
--- IP Configuration
|
--- VLAN discovery

Table of Contents

Other manuals for Siemens OPENSTAGE 20

Related product manuals