Siemens OPENSTAGE 20 - Default Route;Gateway

Administration
A31003-O1010-M100-9-76A9, 05/05/2008
3-16 HiPath 8000 - OpenStage Family, Administration Manual
administration.fm
IP Network Parameters
3.3.4 Default Route/Gateway
If not provided by DHCP dynamically (see Section 3.3.2, “Use DHCP”), enter the IP address of
the router that links your IP network to other networks. If the value was assigned by DHCP, it
can only be read.
Administration via WBM
Network > IP configuration
Administration via Local Phone
>
The change will only have effect if you restart the phone.
|
--- Administration
|
--- Network
|
--- IP Configuration
|
--- Route (default)