Siemens OPENSTAGE 20 - Features - Configuration; Allow Refuse

administration.fm
A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual
3-45
Administration
Features - Configuration
3.6 Features - Configuration
3.6.1 Allow Refuse
This parameter defines whether the Refuse Call feature is available on the phone. The possible
values are "Yes" or "No". The default is "Yes".
Administration via WBM (V1R2.x)
System > Features > Configuration
Administration via WBM (V1R3.x upwards)
System > Features > Configuration