Siemens optiPoint 410 S Series - Page 29

Important Procedures with optiPoint display module
29

DeutschEnglish
Important Procedures with optiPoint display module
Used with optiPoint 410/420 standard/advance S. A plastic stylus was delivered along with your
optiPoint display module. You can select functions on the display by pressing the tip of the stylus
lightly on the display surface or move graphics content such as scroll bars.
= Open the menu = Put a call on hold
= Answer a call or start dialing = Retrieve a call
= Deflect or transfer = Disconnect or decline
= Press display key =Expand the intrusion bar
Pick up a call
Click the off hook icon to the answer
call.
Deflect Incoming Call
Click the Deflect icon to deflect the
call.
o
Enter target number.
Click on Deflect to start.
Decline a call
Click the on hook icon to decline the
call. The caller will receive information
that the call has been unsuccessful..
The display returns to the idle menu.
Call Control
Mon 03/03/03 11:34AM
Incoming Call
Bill Smith
987654321
Pick up a waiting Call
Click the off hook icon to answer the
waiting call.
Call Control
Mon 03/03/03 11:34AM
00:24
Bill Smith
987654321
Jane Brown
Consult/Transfer
Call Control
Mon 03/03/03 11:34AM
00:24
Jane Brown
123456789
00:24
On Hold
Alternate
Bill Smith
987654321
Conference Complete