Siemens optiPoint 410 S Series - Important Operating Procedures; Hands-Free Mode; Repeat Dialing

Important Operating Procedures
25

DeutschEnglish
Important Operating Procedures
optiPoint 410/420 economy/economy plus/standard/advance S
n
= Lift the handset = Press the key
t
= Replace the handset = Press the illuminated key
s
= Conduct a call = Press the flashing key
o
= Enter a telephone number
=
The option appears on the screen.
Press the : key to confirm your selection.
=
Search for an option.
Press the < > keys, until the option appears on the
screen. Then press the : key to confirm your selection
Dial?
Deflect call?
Operation in Idle State
Answering Call by Handset
w
Telephone is ringing
n
Answering Call by
Handsfree Mode
w
Telephone is ringing
or
Dial by Missed Calls List
u v select call no. (if appl.)
n
Refuse call
w
Telephone is ringing
Loudspeaker
Answer call?
Missed Calls
1234 Tom Miller?
Dial?
Refuse call?
Deflect Incoming Call
w
Telephone is ringing
o Enter target number
n
Repeat Dialing
n
Change Ringer Volume
w
Telephone is ringing
u v vary the volume
save
Deflect call?
Please dial #?
Dial?
Repeat dialing
2=0192837465?
Dial?
Switching to Handsfree Mode
s
Simultaneously:
+ t
Change Handset Volume
s
u v vary the volume
save
Program Dest. Key
Press required key
o enter destination call no.
Loudspeaker
05=Setup?
4=Function keys?
1=Non shiftes keys?
02=Selected dialing
Program destination #?
Program destination