Alphabetical Reference
88
– Probe Interface: This port is required for error searches in customer
systems (test interface). It allows external feedback suggestions
from messages to be entered in telephones thus enabling different
scenarios to be tested.
– Test Interface: This function permits automatic regression tests.
Keystrokes can be simulated and displays or audio statuses can be
read out.
– CTI: This function provides classic dialing assistance (for example, via
Windows dialing aid application).
– Resource Sharing: The PC mouse and keys can be used to control
telephone applications (for example, DSM).
Page 66
Service Agent Request
• Enter the Port number for transfer of the Service Agent Requests.
Page 66
Silence Suppression
• You can use this option to define whether the suppression of
background noise should be activated during silence (no conversation).
• Default value Page 109.
Page 30 Page 58
Self Labeling Key Test
• Configurable on optiPoint 420 Workpoints only.
• Execute this test to check the Self Labeling Key Display.
Page 35
SNMP
• Activate this field to deactivate read access to telephone data (for
example, the device type can no longer be read via SNMP).
The SNMP traps sent by a telephone are not affected by this.
Page 66
SNMP Trap Active
• Activate the checkbox to start the SNMP protocol.
Page 63
SNMP Password
• Specify the password that was defined in the SNMP server as the
password for accessing this server.
• Valid values: Alphanumeric
• Minimum length: 1 (for more information, see Password Functions)
• Maximum length: 24
• Default value: Public
Page 63
To Next Page
Loading...
