Siemens OXYMAT 6F - 7 Technical Specifications; 7.1 General Specifications

Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
A5E45779389002-01, 09/2018
37
7
Technical specifications
7.1
General technical specifications (all analyzers)
These specifications are valid unless otherwise defined in the technical specifications for the analyzer version.
Enclosure
Operating position of the analyzer
Front panel vertical
Degree of protection
IP65 according to EN 60529
Dimensions
438 mm x 480 mm x 311 mm (W x D x H)
Electrical characteristics
EMC interference immunity
(with safety extra-low voltage (SELV) with
safe isolation)
In accordance with standard requirements of NAMUR NE21 or EN 61236
Electrical safety In accordance with EN 61010-1,
overvoltage category II (heated devices) or
overvoltage category III (non-heated devices)
Power supply 100 to 120 V AC (nominal range of use 90 V to 132 V), 48 to 63 Hz or
200 to 240 V AC (nominal range of use 180 V to 264 V), 48 to 63 Hz
Climatic conditions
Permissible ambient temperature
• During operation
• During transportation and storage
+5 to +45 °C (41 to 113 °F)
-30 to +70 °C (-22 to 158 °F)
Permissible ambient humidity < 90% RH (relative humidity) average annual value, during transporta-
tion and storage,
no falling below dew point
Permissible ambient pressure
700 to 1200 hPa absolute
Note
Since measuring ranges can be changed, the specifications regarding accuracy relate to the measuring ranges specified on
the label!
The data for the technical specifications is based on IEC
61207.