Siemens RAR Series - Commissioning and Standards; Commissioning Notes; Standards and Certificates; Service Notes

3/4
Building Technologies Division CC1N7713en
Industry Sector 30.08.2010
Standards and certificates
Conformity to EEC directives
- Electromagnetic compatibility EMC (immunity)
- Low-voltage directive
2004/108/EC
2006/95/EC
ISO 9001: 2010
Cert. 00739
ISO 14001: 2010
Cert. 38233
Service notes
• Each time a unit has been replaced, check to ensure that wiring is in an orderly
state and that the wires are firmly connected
Disposal notes
The flame detector contains electrical and electronic components and must not be dis-
posed of together with household waste.
Local and currently valid legislation must be observed.
Mechanical design
- Housing made of dust-proof duroplast
- Photocell is under protective glass
- Flame detector can be supplied with or without flange (version 4 241 8855 0) and
clamp (refer to «Type summary»)
Type summary
Type
reference
Length of
detector cable
Clamp and flange Photocell made of
RAR9 max. 100 m Without clamp / flange Silicon
RAR9(1) max. 100 m With clamp and flange with radius Silicon
RAR9(2) max. 100 m With clamp and flange straight Silicon
When ordering, please give the type reference according to «Type summary».
Accessories
Item Part number
Flange with radius 4 241 8855 0
Flange straight 4 241 8898 0
Clamp 4 199 8806 0
Type reference Description
AGG09
IP40 Kit for RAR...
- Cable sealing element Ø 5...8 mm
Only in connection with
the burner control