23 / 40
Siemens RDF300…/RDF340.../RDF400… Basic Documentation CE1P3076en
Building Technologies 4BFunctions 28 Aug 2008
4.10 Auto Timer (RDF400… only)
The controller provides an Auto Timer mode with 8 programmable timers.
Each timer can be assigned to one or several days. In this mode, the controller
automatically changes over between Comfort and Energy Saving mode as per the
preprogrammed timers.
Auto Timer for Comfort mode Auto Timer for Energy Saving mode
Each timer has a Comfort mode start and end time that can be applied to one or
several weekdays.
To adjust the time schedule, press the
button for 3 seconds to go to the
programmable timer setting mode.
This mode is indicated by Ax (x= auto timer 1...8) and the time _ _:_ _ flashes.
Proceed as follows for each Auto Timer:
1. The
and symbols are displayed. Press + or - to adjust the Comfort mode
start time and confirm by pressing
.
2. The
and symbols are displayed. Press + or - to adjust the Comfort mode
end time or Energy Saving start time and confirm by pressing
.
Set timers
To Next Page
Loading...
Need help?
General
