To Next Page

To Previous Page

Fan coil – application overview

Application description

– Control sequences for heating and/or cooling,

1 or 2 stages

– Multifunctional inputs for keycard contact,

external sensor, etc.

– Automatic or manual heating/cooling changeover

– Automatic or manual fan speed

– 3-speed, 1-speed and mod. (ECM) fan control

(DC 0...10 V)

– Fan operation selectable in heating and cooling

mode (enable, disable, heating only or cooling only)

Application

Type of control outputs

RDG..

Wall-mounted range

RDF..

Semi ﬂ ush-mounted range

2-pipe system

2-pipe (ON/OFF) RDG100.. RDG110 RDF300.. RDF310..

RDF600.. RDF410..

2-pipe mod. (PWM) RDG100..

2-pipe mod. (3-pos.) RDG100.. RDF300..

RDF600..

2-pipe mod. (DC 0...10 V) RDG140 RDG160KN RDF340

2-pipe mod. (DC 0...10 V) ECM fan control (DC 0...10 V) RDG160..

2-pipe (ON/OFF) ECM fan control (DC 0...10 V) RDG160KN

2-pipe system with el. heater

2-pipe (ON/OFF), with el. heater (ON/OFF) RDG100.. RDG110 RDF300..

RDF600..

2-pipe (ON/OFF), with el. heater (mod. PWM or 3-pos.) RDG100..

2-pipe mod. (PWM), with el. heater (ON/OFF, PWM or 3-pos.) RDG100..

2-pipe mod. (3-pos.), with el. heater (ON/OFF, PWM or 3-pos.) RDG100..

2-pipe mod. (DC 0...10 V), with el. heater (DC 0...10 V) RDG140 RDG160KN RDF340

2-pipe mod. (ON/OFF, DC 0...10 V), with el. heater

(ON/OFF, DC 0...10 V).

ECM fan control (DC 0...10 V)

RDG160..

3076S02

(B1)

Siemens RDF600T Application Guide

Other manuals for Siemens RDF600T