3/7
Siemens Room temperature controllers CE1N3069en
Building Technologies 14.12.2007
Mechanical design
The unit consists of 3 parts:
• Plastic housing with digital display accommodating the electronics, operating ele-
ments and built-in room temperature sensor
• Baseplate (mounting base)
• Removable battery compartment
The housing engages in the baseplate and snaps on. The baseplate carries the screw
terminals. There is a reset button on the rear of the unit.
1
Display of the room temperature in °C
2
Indicates a request for heat
3 Temperature setting knob
4 Battery compartment
5
Comfort temperature setpoint
6
Indicates low battery power; replace batteries
Key
To Next Page
Loading...
