4 / 18
Siemens Room temperature controller radio set REV24RF../SET CE1N2206en
Building Technologies 24.04.2008
2
Operating mode selector
Automatic weekly mode with max. three heating or cooling phases per
day.
Exception day with max. three heating or cooling phases.
Continuous comfort mode (= continuous comfort temperature).
Continuous energy saving mode (= continuous energy saving
temperature).
Protection mode (protection against frost or overheating).
3
INFO
Pressing the Info button once illuminates the display. Illumination
automatically turns off after a short period of time.
Pressing the Info button again activates the information display: is lit.
The unit first displays queued error messages followed by important
information (e.g. time switch programs, etc.).
4
Plus button
Increase values, set time, or make a selection.
5
Override button / party mode
In the time switch program, this button allows you to quickly change from the
active temperature level to the next and back.
Thus, you can quickly change to energy saving temperature when you leave
the apartment for a short period of time, thus saving energy.
The display indicates the change. It is valid only until the next switching time.
ty mode: Press the button for 3 seconds.
Party mode is available only in operating modes and . In party mode,
the controller controls to a freely selectable temperature for a freely
selectable period of time.
In party mode, symbol is displayed along with the end of party mode.
6
Minus button
Decrease values, set time, or make a selection.
To Next Page
Loading...
Need help?
General
