Siemens RUGGEDCOM RSG907R - Page 12

Introduction
1.2Description
7
2
3
4
5
6
8
9
1
1
POWER LED
2
ALARM LED
3
USB Console Port
4
RNA Port (Port A/B)
5
Port 5
6
Fiber Optic Ethernet Ports (Ports 1 to 4)
7
Failsafe Alarm Relay
8
Power Supply Terminal Blocks
9
Chassis Ground Screw
Figure1.1 RUGGEDCOM RSG907R
POWER LED Illuminates green during boot up and when power is supplied to the
device.
ALARM LED Illuminates red when an alarm condition exists.
Console Port The USB Type-B console port is for interfacing directly with the
device and accessing initial management functions. For information
about connecting to the device via the serial console port, refer to
"Connecting to the Device (Page 23)".
Communication Ports Communication ports in general receive and transmit data, as
well as provide access to the RUGGEDCOM ROS Web interface.
For more information about the various ports available, refer to
"Communication Ports (Page 25)".
Failsafe Alarm Relay Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
• "Connecting the Failsafe Alarm Relay (Page 11)"
• "Failsafe Alarm Relay Specifications (Page 30)"
Power Supply Terminal Blocks Pluggable terminal blocks for connecting one or more power
sources. For more information, refer to "Connecting Power (Page
13)" and "Power Supply Specifications (Page 29)".
Chassis Ground Terminal Protects the device from power surges and accumulated static
electricity. For information about grounding the device, refer to
"Connecting Power (Page 13)".
RUGGEDCOM RSG907R
Installation Manual, 10/2020, C79000-G8976-1387-10
3