Siemens RUGGEDCOM RX1500 - Acma; Rohs; Other Approvals

Certification
6.1.7RoHS
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online Sup-
port at https://support.industry.siemens.com/cs/ww/en/view/89855782.
6.1.7 RoHS
This device is declared by Siemens AG to meet the requirements of the following Ro-
HS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Informa-
tion Products
A copy of the Material Declaration is available online at https://support.indus-
try.siemens.com/cs/ww/en/view/109738831.
6.1.8 Other Approvals
This device meets the requirements of the following additional standards:
• IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
• IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
• IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General Require-
ments
6.2 EMC and Environmental Type Tests
The RUGGEDCOM RX1500 has passed the following Electromagnetic Compatibility
(EMC) and environmental tests.
54
RUGGEDCOM RX1500
Installation Manual, 05/2020, C79000-G8976-1053-17