Siemens RVL481 - Operating State and Operational Level

24/118
Siemens Heating and D.h.w. Controller RVL481 CE1P2541en
Building Technologies 3 Fundamentals 20.05.2008
3.8 Operating state and operational level
The user selects the required heating circuit operating mode by pressing the respective
button. Each operating state has a maximum of 2 operating states – with the exception
of operating mode "Continuously NORMAL heating" (only one operating state possi-
ble).
When the ECO function is active, and in the case of quick setback, the operating state
is always OFF.
When the operating state is ON, there is a maximum of 3 operational levels, depending
on the operating mode. The operational level is determined by the heating program and
the holiday program.
2540Z08
OFF ON
ON ON
ONOFF OFF
Operating mode
Operating state
Operational level