Siemens S55 - Network

Setup
102
S55 am, A31008-H5700-A40-1-7619 (14. July 2003, 16:49)
© Siemens AG 2002, I:\Mobil\L55\S55_Marlin\am\S55\fug\S56L_Setup.fm
Network
§Menu§KSetupKNetwork
KSelect function
Line
This function is only displayed if it is
supported by the service provider.
Two separate phone numbers must be
registered on the phone.
Select
Select phone number in current use.
‘
Display current phone
number.
Block line
(Phone code protected)
You may limit usage to one phone
number.
Network info
The list of GSM networks currently
available is displayed.
²
Indicates forbidden ser-
vice providers (depending
on SIM card).
§Menu§
KSetupKNetwork
KSelect function.
Choose network
Network search is restarted. This is
useful if you are not on your home
network or want to register on a dif-
ferent network. The network list is re-
built when Auto network is set.
Auto network
Activate/deactivate, see also Choose
network above. If "Automatic net-
work" is activated, the next network
on the list is dialed in ranking order
of your "preferred networks". Alter-
natively select a different network
manually from the list of the avail-
able GSM networks.
Pref. network
Enter your preferred service provid-
ers here for when you leave your
home network (e.g. if there are dif-
ferences in price).
Note
Settings for phone numbers .......page 120
L
Note
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.