Siemens S55 - Keys; Mobile

Setup
90
S55 am, A31008-H5700-A40-1-7619 (14. July 2003, 16:49)
© Siemens AG 2002, I:\Mobil\L55\S55_Marlin\am\S55\fug\S56L_Setup.fm
Keys
§Menu§KSetupKKeys
KSelect a function
Any to answer
You can press any key to accept an
incoming call.
(except
B
).
Auto key lock
When the key lock is activated, the
keypad locks automatically if no key
has been pressed for one minute in
standby mode. This prevents the
phone from being used accidentally.
You can, however, still receive calls
and still make an emergency call.
The keypad can also be directly
locked and unlocked
as follows.
#
Hold down.
Key tones
You can set the type of acoustic key
tone:
Click or Tone or Still
Mobile
§Menu§KSetupKMobile
KSelect function.
Call waiting
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it (see al-
so page 21).
Hide ID
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on ser-
vice providers).
To suppress this display, you can ac-
tivate the "Hide ID" mode for the
next call or for all subsequent calls.
You may need to register separately
with your service provider for these
functions.
Forwarding
You can set the conditions under
which calls are forwarded to your
mailbox or other numbers.
Set up call forwarding (example):
The most common condition for call
forwarding is:
L
L