Siemens S7-200 - Configuring WinCC flexible HMI Station

Siemens S7-200 Driver
Index
A
Address Descriptions 17
Analog Inputs 18, 21
Analog Outputs 18, 21
Arrays 19, 22
Attempts Before Timeout 14
B
Block may have addresses out of range. | Block start address = '<address>', Block size = <count>
(bytes). 24
Boolean 16
Byte 16
C
Channel Assignment 12
Channel Properties 4
Communication Protocols 4
Communications Timeouts 13-14
Connect Timeout 14
Counter Current Values 18, 21
Counter Status Bits 18, 21
D
Data Collection 12
Data Types Description 16
Demote on Failure 15
Demotion Period 15
Device Properties 11
Device Properties — Auto-Demotion 14
Discard Requests when Demoted 15
Discrete Inputs 17, 20
Discrete Outputs 17, 20
www. ptc.com
25