Need help?Do you have a question about the Siemens S7-200 and is the answer not in the manual?
General| CPU Types | CPU 221, CPU 222, CPU 224, CPU 224XP, CPU 226 |
|---|---|
| Programming Languages | Ladder Logic, Function Block Diagram |
| Communication | PPI |
| Program Memory | 4 KB to 16 KB |
| Data Memory | 2 KB to 10 KB |
| Power Supply | 24V DC |
| Digital Inputs | 6 to 24 depending on CPU model |
| Digital Outputs | 4 to 16 depending on CPU model |
| Analog Inputs | 0 to 2 depending on CPU model |
| Analog Outputs | 0 to 2 (depending on CPU model) |
| Real-time Clock | Yes |
| Operating Temperature | 0°C to 55°C |
Explains how process values are acquired and sent with a timestamp.
Details how data records are received and archived on the S7-200 "Backup" station.
Explains data reception and archiving for S7-300, S7-400, and WinAC stations.
Describes how to visualize and control archived data using a PC.
Step-by-step guide for configuring the S7-200 "Basis" station using MicroWin.
Step-by-step guide for configuring the S7-200 "Backup" station using MicroWin.
Step-by-step guide for configuring the S7-300 "Backup" station.
Step-by-step guide for configuring the S7-400 "Backup" station using STEP 7.
Step-by-step guide for configuring the WinAC "Backup" station using STEP 7.
Step-by-step guide for configuring the WinCC flexible "HMI" station.
Details the operational aspects and testing of the automation set.
Details how data records are archived and accessed on the S7-200 "Backup" station.
Explains data archiving and monitoring for S7-300, S7-400, and WinAC backup stations.
Guides on controlling and monitoring data via the WinCC flexible "HMI" station.
To Next Page
