Configuration
Micro Automation Set 14 Entry ID 21062588
V2.0 05/18/05 7/35
Copyright © Siemens AG 2005 All rights reserved
Set14_DocTech_V2.0_en.doc
2 Configuration
Layout diagram of Micro Automation Set 14 – overview
Micro Automation Set 14 can be realized in different versions. The above
figure shows the basic configuration with all backup stations which can be
used.
A standard Windows PC with STEP 7 Micro/WIN or STEP 7 is used.
S7-300 “Backup”
S7-400 “Backup”
WinAC “Backup”
CPU 222
CP 243-1
PS 307
CPU 315 PN/DP
PS 407
CPU 412-1
CP 443-1
MicroBox PC 420
S7-200 “Basis”
Facility
management
Production
management
(SIMATIC IT)
Further
areas
Standard Windows PC
WinCC flexible “HMI”
Company network
CPU 222
CP 243-1
S7-200 “Backup”
Automation network
SCALANCE X108
Configuration
PC
Standard Windows PC
To Next Page
Loading...
