Live Demo
Micro Automation Set 14 Entry ID 21062588
V2.0 05/18/05 29/35
Copyright © Siemens AG 2005 All rights reserved
Set14_DocTech_V2.0_en.doc
WinCC flexible “HMI” station – connection settings
The “choose connection” display enables to select between the four
possible “Backup” stations. This display appears after starting the WinCC
flexible project. The following features are available:
1. Clicking the “Connection” button activates the above display.
2. The connection partner of S7-200 “Basis” can be selected by clicking
these buttons.
3. The connecting line between S7-200 “Basis” and the selected “Backup”
station is only visible if the connection has been successfully
established.
4. The selected “Backup” station is displayed graphically or textually.
5. This button indicates the currently selected language. The language
can be changed by clicking this button.
3
2
1
4
5
To Next Page
Loading...
