Siemens S7-300 - 3 Configuration and parameter assignment; 3.1 Configuring

25
Product Information on the Manual S7-300 Module Specifications, Edition 11/2002
A5E00213444-02
3 Analog Output Module SM 332; AO 4 y 16 Bit; clocked;
(6ES7 332-7ND01-0AB0)
Order number
6ES7 332-7ND01-0AB0
Characteristic
The Analog Output Module SM 332; AO 4 × 16 Bit has the following characteristic
features:
S 4 outputs in 4 channel groups
S Individual output channels can be programmed as
– voltage outputs
– current outputs
S Resolution of 16 bits
S Supports clocked operation
S Supports the function “Reparameterization in RUN mode”
S Programmable diagnostics
S Programmable diagnostic interrupt
S Programmable substitute value output
S Galvanic Isolation between:
– backplane bus interface and analog output channels
– the different analog output channels
– analog output and L+, M
– backplane bus interface and L+, M