Configuring with Web Based Management
6.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
219
Requirements for the DHCP server
● In access point mode
– The connected devices are configured so that they obtain the IPv4 address from a
DHCP server.
● In client mode
– The connected devices are configured so that they obtain the IPv4 address from a
DHCP server.
– NAT is enabled. You enable NAT in "Layer 3 > NAT"
To Next Page
Loading...
