Siemens SCALANCE W788-1 M12

Configuring with Web Based Management
6.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
229
3. Select the check box in the required row "Trap".
4. Click the "Set Values" button.
Deleting a trap entry
1. Enable "Select" in the row to be deleted.
2. Click the "Delete" button. The entry is deleted.
6.5.12.3
v3 Groups
Security settings and assigning permissions
SNMP version 3 allows permissions to be assigned, authentication, and encryption at
protocol level. The security level and read/write permissions are assigned according to
groups. The settings automatically apply to every member of a group.
Description
The page contains the following boxes:
●
Group Name
Enter the name of the group. The maximum length is 32 characters.
●
Security Level
Select the security level (authentication, encryption) valid for the selected group. The
available options are as follows:
– No Auth/no Priv
No authentication enabled/no encryption enabled.
– Auth/no Priv
Authentication enabled/no encryption enabled.
– Auth/Priv
Authentication enabled/encryption enabled.