Siemens SCALANCE X-400 - Page 33

Certification
5.1 Approvals, Certificates
SCALANCE X-400 extender modules
Compact Operating Instructions, 04/2013, A5E00367421-10
33
Explosion protection directive (ATEX)
The SIMATIC NET product meets the requirements of the EC directive:
94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres"
Note
When using (installing) SIMATIC NET products in hazardous area zone 2, make absolutely
sure that the associated conditions are adhered to.
You will find these conditions on the SIMATIC NET Manual Collection.
● "Approval of SIMATIC/ SIMATIC NET Products for Direct Installation in Ex-Zone 2"
ATEX classification II 3 G Ex nA IIC T4 Gc
KEMA 07ATEX0145 X
The product meets the requirements of the standards
● EN 60079-0: 2009
● EN 60079-15: 2005 (electrical apparatus for potentially explosive atmospheres; Type of
protection "n")
ATEX classification II 3 (2) G Ex nA [op is] IIC T4 Gc
DEKRA 11ATEX0060 X
The product meets the requirements of the standards:
● EN 60079-0: 2009
● EN 60079-15: 2005
● EN 60079-28: 2007
FM Approval
The product meets the requirements of the standards
● Factory Mutual Approval Standard Class Number 3611
● FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 A and
Non Incendive / Class I / Zone 2 / Group IIC / T4
Note for Australia
The product meets the requirements of the AS/NZS 2064 standard (Class A).