Siemens SED2 User Manual

AOP Overview
Siemens Building Technologies, Inc. 5
Key/
Function
Functional Description
Change
Single
Parameter
Digit
Quickly change a single digit of a parameter value as follows:
1. Ensure you are in the parameter value changing level.
2. Press
and the right hand digit blinks.
3. If desired, press
or to change the value of this digit.
4. Press
again and the next digit blinks.
5. Perform steps 3 and 4 until the required value appears.
6. Press
to leave the parameter value changing level.

Siemens SED2 Specifications

General

Input Voltage	380-480V AC
Current Rating	Depends on model
Control Type	Digital
Communication	PROFIBUS, PROFINET, Ethernet
Communication Interface	RS485
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Operating Temperature	0 to +45 °C
Storage Temperature	+70 °C