Spare parts/accessories
14.1 Installation
3VL IEC molded case circuit breakers
304 System Manual, 11/2013, 110 0110 - 02 DS 03
Masking frames for door cutouts:
Masking frames for door cutouts are used to increase the IP degree of protection of the
molded case circuit breakers and to better adapt them to the control cabinets. Masking
frames for door cutouts are available for fixed-mounted, plug-in and withdrawable molded
case circuit breakers with rotary operating mechanisms, motorized operating mechanisms
and RCD modules. The masking frames for door cutouts are attached to the door with
4 fixing elements.
Masking frames for door cutouts
-8BG00
3VL9300-8BJ00 / 3VL9300-8BD00
To Next Page
Loading...
