Siemens SIMATIC BusAdapter User Manual

BusAdapter BA 2xLC
7.4 Technical specifications
BusAdapter
40 Equipment Manual, 08/2020, A5E41449003-AB
7.4 Technical specifications
Technical specifications of BusAdapter BA 2xLC
The following table shows the technical specifications as of 02/2020. You can find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/de/en/pv/6ES7193-6AG00-0AA0/td?dl=de).
Article number
6ES7193-6AG00-0AA0
General information
Product type designation
BA 2xLC
HW functional status
from FS04
Interfaces
Number of PROFINET interfaces
1; 2 ports (switch) LC Multimode Glass Fibre
Supports protocol for PROFINET IO
• Number of SCRJ ports
0
• Number of LC ports
2; Wavelength of 1 270 ... 1 380 nm, corresponds
to 100BASE-FX
Cable length
– Multimode graded-index fiber 50/125
µm
3 km
– Multimode graded-index fiber 62.5/125
μm
3 km
Ambient conditions
Ambient temperature during operation
• horizontal installation, min.
-30 °C
• horizontal installation, max.
60 °C
• vertical installation, min.
-30 °C
• vertical installation, max.
50 °C
Altitude during operation relating to sea level
• Installation altitude above sea level, max.
2 000 m; On request: Installation altitudes greater
than 2 000 m
Dimensions
Width
20 mm
Height
69.5 mm
Depth
59 mm
Weights
Weight, approx.
40 g

Siemens SIMATIC BusAdapter Specifications

General

Brand	Siemens
Model	SIMATIC BusAdapter
Category	Cables and connectors
Language	English