BusAdapter
Equipment Manual, 08/2020, A5E41449003-AB
49
9.1 Product overview
Article number
6ES7193-6AP20-0AA0
View
Figure 9-1 BusAdapter BA SCRJ/RJ45
Properties
You connect PROFINET IO connection cables to the PROFINET device via the BusAdapter
BA SCRJ/RJ45:
• Optically with fiber-optic cables (FOC) with an SCRJ connector to port 1
• Electrically with a standard RJ45 connector to port 2
To do this, screw the BusAdapter BA SCRJ/RJ45 to the PROFINET device and plug in the SCRJ
connector or the RJ45 connector.
You can loop through PROFINET IO via the integrated 2-port switch. You can use any port of
the BusAdapter for feeding or for looping through. The integrated media converter converts
the signals automatically.
To Next Page
Loading...
Need help?
General
