Siemens SIMATIC Compact FF Link

To Next Page

To Previous Page

Application planning

4.5 Redundant connection of the Compact FF Link

Compact FF Link

24 Operating Instructions, 03/2015, A5E35651552-AA

Main Page

Table of Contents3
Preface7
Security Information7
Product Overview11
Integration in the Automation Landscape11
Integrating Compact FF Link12
Description of the Components13
Compact FF Link13
Active Field Distributor for Connecting FF Segments15
Application Planning17
Applications for Compact FF Link17
Configuration Options17
Configuration Variants of the Compact FF Link19
Single-Channel Connection of the Compact FF Link21
Redundant Connection of the Compact FF Link21
Mounting25
Installation Rules for Compact FF Link25
Mounting Rules for Active Field Distributors25
Installing the Compact FF Link26
Installing the Compact FF Link for Single-Channel Operation26
Installing the Compact FF Link for Redundancy Mode28
Setting the PROFIBUS Address and Redundancy Mode30
Connecting33
Electrical Isolation and Grounding33
Connecting Compact FF Link Without Redundancy34
Wiring the Compact FF Link for Non-Redundant Mode34
Connecting Compact FF Link with Redundancy35
Connecting Compact FF Link with Coupler Redundancy35
Connecting Compact FF Link with Ring Redundancy36
Wiring the FOUNDATION Fieldbus to the Active Field Distributor37
Connecting the Power Supply37
Connecting PROFIBUS DP on Compact FF Link38
Connecting FOUNDATION Fieldbus on Compact FF Link39
Commissioning41
Overview for Commissioning the Bus Link41
Operation of the Bus Link43
Startup/Operation Without CPU43
Startup with CPU44
Behavior after Certain Events in the Redundancy Mode44
Startup Behavior45
Startup Behavior in Non-Redundant Mode46
Startup Behavior in Redundant Mode47
Handling the Quality Code of Cyclic Data48
Service and Maintenance49
Replacing a Bus Link49
Replacing Active Field Distributors50
Firmware Update of the Compact FF Link50
Restoring a Compact FF Link FF to the Factory State51
Maintenance52
Functions53
Redundancy with Compact FF Link53
Identification and Maintenance Data (I&M Data)54
System Modification During Operation55
Control in the Field (Cif)56
Alarm, Error, and System Messages57
Diagnostics Using Leds57
Leds of the Compact FF Link57
Leds of the Active Field Distributors62
Diagnostics of the Compact FF Link62
Structure of Slave Diagnostics64
Structure of the Diagnostic Blocks65
Default Diagnosis65
Identifier-Related Diagnostics67
Module Status69
Status Message71
H Status71
Interrupts73
Reading out Diagnostics from FF Devices75
Technical Data77
General Technical Data77
Standards and Approvals77
Use in Zone 2 Potentially Explosive Areas81
Electromagnetic Compatibility81
Shipping and Storage Conditions83
Mechanical and Climatic Ambient Conditions for Operation83
Specifications for Insulation Tests, Protection Class and Degree of Protection85
Rated Voltage86
Technical Specifications Compact FF Link (6ES7655-5BA00-0AB0)86
Technical Specifications of Active Field Distributors87
Article Numbers89
Components for Use of the Compact FF Link89
Accessories for PROFIBUS DP89
Accessories for FOUNDATION Fieldbus90
Glossary91
Index99

Siemens SIMATIC Compact FF Link - Page 24

Table of Contents

Related product manuals