Siemens SIMATIC CP 340 User Manual

Technical Specifications
A.1 Technical Specifications of the CP 340
PtP coupling and configuration of CP 340
Manual, 04/2011, A5E00369892-03
163
Technical specifications for the printer driver
The table below shows the technical specifications for the printer driver.
Table A- 7 Technical specifications for the printer driver
Printer driver
Length of the text SDB 8 KB
Parameter The following can be configured:
 Transmission rate: 2400, 4800, 9600 bps
 Character frame: 10 or 11 bits
 Flow control: None, XON/XOFF, RTS/CTS
 XON/XOFF characters (with "flow control" = "XON/XOFF" only)
 Wait for XON after XOFF (wait time for CTS = ON): 20 ms to 65530 ms in 10-ms
increments
 Message text: max. 150 characters (max. 250 characters when variables are displayed)
 Left margin (number of blanks): 0 to 255
 Lines per page (with header and footer): 1 to 255 or 0 (continuous printing)
 Separators/line end: CR, LF, CR LF, LF CR
 Character set: IBM Proprinter or user-defined
 Printer emulation for bold, condensed, expanded, and italic type and underlining: HP
Deskjet, HP Laserjet, IBM Proprinter or user-defined
 1/2 header and/or footer

Siemens SIMATIC CP 340 Specifications

General

Brand	Siemens
Model	SIMATIC CP 340
Category	Computer Hardware
Language	English