Siemens simatic ET 200MP - Block Diagram and Pin Assignment for Voltage Measurement

Product overview
2.2 Functions
IM 155-5 PN HF Interface Module (6ES7155-5AA00-0AC0)
Manual, 10/2018, A5E32840985-AB
15
Requirements
The table below shows the software requirements for a configuration with the
IM 155-5 PN HF interface module:
Table 2- 1 Requirements
PROFINET IO function
Configuration software
with GSD file
1)
STEP 7 (TIA Portal) V13 or
higher
STEP 7 V5.5 SP3 or higher
STEP 7 (TIA Portal) V13 or
higher
Real-time communication
X
X
X
Isochronous real-time com-
munication (IRT)
X X X
Prioritized startup
X
X
X
Device replacement without
PG
X X X
Media redundancy (MRP)
X
X
X
Media redundancy with
planned duplication (MRPD)
X X -
Shared Device
• with up to two IO control-
lers
• with up to four IO control-
lers
X
-
X
2)
X
2)
-
-
Isochronous mode
-
-
X
System redundancy on
S7-400H
X - -
System redundancy S2
X
-
As of V15.1
IO devices changing during
operation ("alternative part-
ners")
• Docking station
As of V5.6 As of V15.1 As of V15.1
1)
The usability of the PROFINET IO functions depends on the configuration software (Siemens and/or third party). Below,
the usability of the PROFINET IO functions is described for STEP 7 only.
2)
No validity check of Shared Device projects