Siemens simatic ET 200MP - 4.2 Parameters

IM 155-5 PN HF Interface Module (6ES7155-5AA00-0AC0)
Manual, 10/2018, A5E32840985-AB
21
Wiring
3
3.1
Pin assignment
24 VDC supply voltage
Table 3- 1 Pin assignment 24 VDC supply voltage
View
Signal name
1)
Designation
1L+ 24 VDC
2L+
24 VDC (for looping through)
2)
1M
Ground
2M Ground (for looping through)
2)
1)
1L+ and 2L+, as well as 1M and 2M are bridged internally.
2)
Maximum 10 A permitted
PROFINET IO with RJ45
Table 3- 2 PROFINET IO pin assignment with RJ45
Bottom view IM
Signal name
Designation
1
TD
Transmit data +
2
TD_N
Transmit data -
3
RD
Receive data +
4
GND
Ground
5
GND
Ground
6
RD_N
Receive data -
7
GND
Ground
8 GND Ground
Additional information
You can find additional information on connecting the interface module and on accessories
(RJ45 bus connector) in the system manual S7-1500, ET 200MP Automation system
(https://support.industry.siemens.com/cs/ww/en/view/59191792).