Siemens simatic ET 200MP - Parameter Data Records; B.1 Parameter Assignment and Structure of the Parameter Data Records; Dependencies for Configuration with GSD File; Parameter Assignment in RUN

Interrupts and diagnostic, error, and system alarms
5.3 Alarms
IM 155-5 PN HF Interface Module (6ES7155-5AA00-0AC0)
Manual, 10/2018, A5E32840985-AB
45
Structure USI = W#16#0002
Table 5- 9 Structure of the USI = W#16#0002
Data block name
Contents
Note
Bytes
USI
W#16#0002 Manufacturer-specific diagnostics if the
permitted number of power supply modules
is exceeded
2
Followed by 3 reserved bytes
Reserved
1
Reserved
1
Reserved
1
The first surplus module is located in slot: <No.>
Slot
B#16#00 to
B#16#1F
1
USI structure = W#16#0003
Table 5- 10 USI structure = W#16#0003
Data block name
Contents
Note
Bytes
USI
W#16#0003 Manufacturer-specific diagnostics if
the permitted number of I/O modules
is exceeded
2
Followed by 3 reserved bytes
Reserved
1
Reserved
1
Reserved
1
The first surplus module is located in slot: <No.>
Slot
B#16#20 to B#16#FF
1
USI structure = W#16#0004
Table 5- 11 USI structure = W#16#0004
Data block name
Contents
Note
Bytes
USI
W#16#0004 Manufacturer-specific diagnostics if
no U connector is detected on an IM
port
2
Followed by 4 reserved bytes
Reserved
1
Reserved
1
Reserved 1
Reserved
1