Siemens simatic ET 200MP - Voltage Limits; Current and Resistance Limits; Limits for Thermal Resistor Pt xxx Standard and Pt xxx Climatic; Limits for Thermal Resistor Ni xxx Standard and Ni xxx Climatic

Technical specifications
IM 155-5 PN HF Interface Module (6ES7155-5AA00-0AC0)
Manual, 10/2018, A5E32840985-AB
51
Article number
6ES7155-5AA00-0AC0
– IRT
Yes
– PROFIenergy
No
– Prioritized startup
Yes
– Shared device
Yes
– Number of IO Controllers with shared
device, max.
4
Redundancy mode
– MRP
Yes
– MRPD
Yes
– PROFINET system redundancy (S2)
Yes
– Redundant PROFINET configuration
(R1)
No
– H-Sync forwarding
Yes
Open IE communication
• TCP/IP
Yes
• SNMP
Yes
• LLDP
Yes
Isochronous mode
Isochronous operation (application synchro-
nized up to terminal)
Yes
Equidistance
Yes
shortest clock pulse
250 µs
max. cycle
4 ms
Interrupts/diagnostics/status information
Status indicator
Yes
Alarms
Yes
Diagnostics function
Yes
Diagnostics indication LED
• RUN LED
Yes; Green LED
• ERROR LED
Yes; Red LED
• MAINT LED
Yes; yellow LED
• Connection display LINK TX/RX
Yes; yellow LED
Potential separation
between backplane bus and electronics
No
between PROFINET and all other circuits
Yes; 1500 V AC
between supply and all other circuits
No
Isolation
Isolation tested with
707 V DC (type test)