Siemens SIMATIC ET 200PA SMART+ User Manual

ET 200PA SMART+ distributed I/O system
4 A5E52951242-AA, 07/2023
1 Notes on Safety and Product Conformity
Manufacturer
Siemens AG
Digital Industries
Process Automation
DE-76181 Karlsruhe
DEUTSCHLAND / GERMANY
Function
SIMATIC products control, regulate and monitor applications in automation systems, for example in the field of industrial
automation technology and process engineering.
Documentation
The complete documentation for the product consists of system manual and function manuals. You can find them here:
Product family ET 200PA SMART+ (https://support.industry.siemens.com/cs/in/en/ps/29688/man
).
About this document
Note
This document is valid for the distributed I/O system ET 200PA SMART+ and the associated components.
Product information
Module
Module type
Article number
AI 16xTC/8xRTD 2/3/4-wire PA
Analog input module
6DL1164-6JH00-0PH1
AI 16xI 2-wire HART PA
Analog input module
6DL1164-6TH00-0PH1
AQ 8xI HART PA
Analog output module
6DL1165-6TF00-0PH1
DI 16x24VDC PA
Digital input module
6DL1161-6BH00-0PH1
DI 32x24VDC PA
Digital input module
6DL1161-6BL00-0PH1
DQ 16x24VDC/0.5A PA
Digital output module
6DL1162-6BH00-0PH1
DQ 32x24VDC/0.5A PA
Digital output module
6DL1162-6BL00-0PH1
Intended use
Use SIMATIC products only in industrial applications.
The product may be operated only by personnel qualified for the specific task in accordance with the relevant
documentation, in particular its warning notices and safety information. Qualified personnel are those who, based on their
training and experience, are capable of identifying risks and avoiding potential hazards when working with these products.
WARNING
Intended use
SIMATIC products are intended for automation of machine plants, process control and process engineering. For the
intended area of application of the respective product (e.g. ambient conditions, possible use in safety-critical systems), refer
to the associated Documentation (https://support.industry.siemens.com/cs/in/en/ps/29688/man
).
If third-party products and components are used, these have to be recommended or approved by Siemens.
Proper transport, proper storage, setup, assembly/disassembly, installation, commissioning, operation, maintenance and
decommissioning are required to ensure that the product and its accessories operate safely and without any problems.
Non-observance may result in death or serious physical injury.
Note the information in the relevant Documentation (https://support.industry.siemens.com/cs/in/en/ps/29688/man
).
Observe the ambient conditions for intended operation as described in the "Technical specifications" section of the system
and equipment manuals.

Siemens SIMATIC ET 200PA SMART+ Specifications

General

Brand	Siemens
Model	SIMATIC ET 200PA SMART+
Category	I/O Systems
Language	English