Siemens SIMATIC ET 200SP Original Instructions

Ex-DI 4xNAMUR
Ex-DI 4xNAMUR
A5E50377423-AB, 03/2023
15
Ex-DI 4xNAMUR
U
m
(voltage at non-intrinsically safe
terminals), max.
60
V
Electrical isolation
Electrical isolation channels
Between the channels
No
Between the channels and the
backplane bus
Yes
Between the channels and electronics
power supply
Yes Electrical isolation between the
channels and input voltage PME
Isolation
Isolation tested with
You can find more information on
insulation in the system manual
ET 200SP HA/ ET 200SP; Modules for
Devices in the Hazardous Area.
Isolation of field circuits to local ground
according to IEC/EN 60079-11 tested
with
707 V DC (type test)
Additional information
You can find more information in the certificate of the I/O module:
Ex-DI 4xNAMUR, 6DL1131-6TD00-0HX1
Manufacturer
Siemens AG
Digital Industries
Process Automation
DE-76181 Karlsruhe
GERMANY
Ex-DI 4xNAMUR
A5E50377423
-AB, 03/2023

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C