Compact Operating Instructions
1.9 Commissioning
SIMATIC HMI IPC477C / HMI IPC477C PRO
26 Compact Operating Instructions, 10/2010, A5E02368072-02
1.9.5 Setting the panel type
1.9.5.1 First commissioning
Initial commissioning
● The "SIMATIC PC Wizard" program is automatically started once during commissioning.
● The "SIMATIC PC Wizard" implements the specific settings for the SIMATIC Panel PC
during the initial startup of the operating system.
● Several dialogs appear on screen during initial commissioning of the SIMATIC Panel PC.
NOTICE
Start the PC for commissioning in an unchanged delivery state and follow the dialogs
until their conclusion.
Procedure
Device-specific drivers are set during the hardware detection and configuration phase.
The type of SIMATIC PC is selected and detected automatically.
To Next Page
Loading...
Need help?
General
