A-4
TP27, TP37 Equipment Manual
Release 01/00
Compliance of the named products with the regulations of Directive 89/336 EEC is verified by confor-
mance with the following standards:
Noise immunity EN 50082-1 TP27-6 TP27-10 TP37
Static discharge (contact discharge) EN 61000-4-2 Class 3
RF irradiation EN 61000-4-3 Class 3
Pulse modulation ENV 50204 (900 MHz î5 MHz)
RF conduction ENV 50141 Class 3
Burst interference ENV 61000-4-4 Class 3
Radio interference TP27-6 TP27-10 TP37
RFI suppression EN 55022 Class A
Certifications TP27-6 TP27-10 TP37
UL certification UL Recognition Mark
Underwriters Laboratories (UL) in compliance with
Standard UL 508, File E 120869
CSA certification CSA Certification Mark
Canadian Standard Association (CSA) in compliance with
Standard C 22.2 No. 142, File LR 89077-19
FM certification
FM Certification
Complying with Factory Mutual Approval Standard Class Number
3611 Hazardous (classified) Locations Class I, Divi-
sion 2, Group A, B, C, D
Warning
Personal injury and material damage may occur.
Personal injury and material damage may occur in
hazardous areas if plug connections are disconnected
during the routine operation of a TP.
In hazardous areas, always de-energize the TP be-
fore unplugging connectors.
!
Warning
WARNING â DO NOT DISCONNECT WHILE
CIRCUIT IS LIVE UNLESS LOCATION IS
KNOWN TO BE NONHAZARDOUS.
!
Technical Data
To Next Page
Loading...
Need help?
General
