Glossary-2
TP27, TP37 Equipment Manual
Release 01/00
C
Definition of system-specific basic settings, messages and screens using the
ProTool configuration software.
Option for Touch Panel with 16 (TP27–6) or 32 TP27–10/TP37) digital input/
outputs for fast key input without any communication–based delay. Can be
used with SIMATIC S/ and PROFIBUS–DP.
D
The point in time at which a message is withdrawn by the PLC.
Function causing the contents of the display to be modified – for example, Dis-
play Message Level, Display Alarm Buffer And Display Process Screen.
Operating mode of the TP during which data are downloaded from the PU or
PC to the TP.
The time between the arrival and departure of a message.
E
Draws attention to specific operating states on machines or systems connected
to the PLC.
F
Reserved area in configured and non-configurable text for the output and/or
input of values.
Programmable memory which can quickly be deleted and then re-written.
H
Additional, configurable information for messages, screens, screen entries and
list boxes.
Configuration
Control Panel
Interface
Departure of a
message
Display function
Download mode
Duration of display
Event message
Field
Flash memory
Help text
Glossar
To Next Page
Loading...
Need help?
General
