Siemens SIMATIC IOT2040 - Identification Data of the Device; Permitted Mounting Positions and Mounting Types

Installing and connecting the device
3.1 Preparing for installation
SIMATIC IOT2020, SIMATIC IOT2040
Operating Instructions, 10/2016, A5E37656492-AB
21
3.1.2
Identification data of the device
The device can be clearly identified with the help of this identification data in case of repairs
or theft.
You can find this information on the rating plate. The following illustration shows an example.
Example rating plate:
Enter the identification data in the table below:
Order number
6ES ...
Serial number S VP
Production version
FS
All existing Ethernet
addresses (MAC)
3.1.3
Permitted mounting positions and mounting types
The device can be attached horizontally or vertically on a DIN rail or to a wall.
Horizontal mounting position, preferred
Vertical mounting position
Take into account the permitted temperature range for operation that depends on the
mounting position in accordance with the "Technical specifications (Page 45)" section.