To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC KTP1500 Basic and is the answer not in the manual?
General| Display Size | 15 inch |
|---|---|
| Touchscreen | Yes |
| Display Type | TFT LCD |
| Mounting | Panel Mount |
| Protection Class (front) | IP65 |
| Communication Interfaces | PROFINET |
| Operating Temperature | 0°C to 50°C |
| Protection Class | IP65 (front), IP20 (back) |
Illustrates and labels the physical components of the KTP400 Basic HMI device.
Details critical safety warnings and precautions for operating the HMI device.
Provides instructions on correctly connecting the 24 VDC power supply to the HMI device.
Details the steps to connect a PC for configuration and project transfer.
Guides on connecting the HMI device to SIMATIC S7 PLCs via DP or PN.
Explains the specific input methods for the KTP400 Basic due to its smaller display.
Details data entry procedures for other Basic HMI models using their screen keyboards.
Describes how to access and use the Control Panel for device configuration.
Guides on configuring communication settings for MPI or PROFIBUS DP.
Details how to set up IP addresses, subnet masks, and network names for PROFINET.
Explains how to adjust screen brightness, contrast, orientation, and delay time.
Provides step-by-step instructions for calibrating the HMI device's touch screen.
Explains how to activate serial or PROFINET channels for data transfer.
Lists the detailed technical specifications for KTP400 and KTP600 Basic models.
Lists the detailed technical specifications for KTP1000 and TP1500 Basic models.
