Approvals
CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1
114 Operating Instructions, 01/2017, C79000-G8976-C426-03
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T4
● Cl. 1, Zone 2, GP. IIC T4
Ta: Refer to the temperature class on the type plate of the CP
Report / UL file: E223122 (NRAG, NRAG7)
Note the conditions for the safe deployment of the CP according to the section Notes on use
in hazardous areas according to UL HazLoc (Page 31).
Factory Mutual Approval Standard Class Number 3600, 3611, 3810
Class I, Division 2, Group A, B, C, D, T4 or Class I, Zone 2, Group IIC, T4
Ta: Refer to the temperature class on the type plate of the CP
The conditions must be met for the safe deployment of the CP according to section General
notices on use in hazardous areas according to FM (Page 32).
The CP meets the requirements of the AS/NZS 2064 standards (Class A).
Marking for the customs union
EAC (Eurasian Conformity)
Customs union of Russia, Belarus and Kazakhstan
Declaration of the conformity according to the technical regulations of the customs union
(TR CU)
MSIP 요구사항 - For Korea only
Registration Number: MSIP-REI-S7M-ET200SP
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며, 가정 외의 지역에서 사용하는것을 목적으로 합니다.
SIMATIC NET products are regularly submitted to the relevant authorities and approval
centers for approvals relating to specific markets and applications.
If you require a list of the current approvals for individual devices, consult your Siemens
contact or check the Internet pages of Siemens Industry Online Support:
Link: (http://support.automation.siemens.com/WW/view/en/45605894)
To Next Page
Loading...
Need help?
General
